This product was formulated to improve adhesion between UV curable ink on plastic substrates like acrylic and styrene.
This product was formulated to improve adhesion between UV curable ink on plastic substrates like acrylic and styrene.
BondAid II is an optically clear solvent-based adhesion promoter.
Our customers, Our biggest value.
Thanks to them we continue to improve our products.
Designed to improve adhesion on plastic sheeting such as acrylic and styrene
Acts as a general cleanser prior to printing
Reduces static electricity on the surface
Reduces ink drop deflection
Reduces the potential for new particles being attracted to the substrate during printing
Always test the results of this product on your specific substrate using your application method prior to using in production
We provide the right ink set according to many different printers colors configuration. Our Process colors are based on a Clean Yellow shade and slighty violet magenta, this combination provides vibrant colors and unbeatable reds.
The most commonly used method of measuring light fastness of a printed material is to expose it to a special artificial light with a spectrum similar to the sun light. Material sample will be exposed together with a special wool counter-sample printed with 8 grades of Blue dye (Blue Wool Scale).
The Swiss Federal Department of Home Affairs (DFI) adopted in March 2008 an amendment to the Ordinance of 23 November 2005 on Materials and Objects in Contact with Food (SR 817.023.21). It entered into force on 4 January 2010 and lays down the obligation for packaging inks to be manufactured only with the authorized substances. Permitted substances are defined as those listed in Annex 2 Lists I and II and in Annex 10, December 2020.
The lists in the Ordinance simply states that the substances may be used in the manufacture of printing inks. To ensure safety in accordance with the law, the migration limits for substances must not be exceeded for final packaging. Guides of Good Practice for the manufacture and printing of printing inks should be followed.
Substances listed with status 'B' may be used, provided that the final packaging is in compliance with the requirements of the Ordinance, i.e. the migration of the listed substances cannot be detected using a valid and official analytical method. The migration should not be greater than 0.01 mg / kg (10 ppb).
INX carried out a review of the raw materials used in the products below to determine their status with respect to the Swiss Ordinance and found that the products below meet the Swiss Ordinance Annex 10.
Accordingly, it does not automatically mean that the product or substance is toxicologically suitable to be used for printing inks for all types of food packaging.
HANDLING
Please ensure that you are wearing the proper PPE. Please use safety goggles and latex gloves as well as apply the pretreatment in a well-ventilated area to ensure the proper evacuation of fumes.
APPLICATION INSTRUCTIONS
1. Lightly saturate a lint-free cloth with BondAid II
2. Wipe the entire substrate surface evenly
a. There is no advantage to heavier applications
3. Allow the solvent to evaporate for 5 minutes at 20°C/50%RH
4. Print on surface
5. Allow 15 minutes post printing before any testing
6. Final results will be best obtained after 24 hours
7. Maximum open time is 48 hours. Do not prep too far in advance.
Always test the results of this product on your specific substrate using your application method prior to using in production.
Our commitment is to provide the most common and used packaging's types available. Find the package that fits your needs.
Read more about this product, you will find useful info and technical details about it, as theTemperature exposure and Jetting, Storage conditions, Shelf Life, and more.
This product should be stored between 20°C - 25°C (68°F-77°F). When stored properly this product should have a 12 month shelf life. Once the bottle is opened its life is 3 months.
Should be between 40% and 75% relative humidity.
This product was formulated to improve adhesion between UV curable ink on plastic substrates like acrylic and styrene.
BondAid II is an optically clear solvent-based adhesion promoter.
Premium UV curable high density pigmented ink set, formulated for use in the printers designed to prefer lower temperature ink.
UV curable pigmented ink set formulated for use in Seiko®, Dimatix®, Ricoh® and Konica Minolta® Heads.
UV and LED curable, formulated for use in Vutek® GS™ Series printers, especially the “r” model runing roll-to-roll.
UV and LED curable formulated for those customers requiring adhesion to difficult medias. Compatible with VUTEk® GS™ printers.
INX Digital’s BSK FLEX ink is a premium UV curable high density pigmented ink set formulated for use in PH with 14-50 picoliter drop size.